Site license — $449
Machinist's Hammer Detail Bench · Release 1.0 · Morningstar DesignWorks, LLC
Everyone at one location, no seat count — and a bench built to your standards.
Everything the product license allows, plus an internal file share for that location's staff and a one-time setup: your alloys and densities, your thread classes and fits, your finish specifications, your tolerance block. Twelve months of email support on the bench itself. Begin with an email, not a purchase — the setup conversation has to happen before there is anything to deliver, and purchase orders are welcome.
What this one covers
Any number of people at one physical location, with no seat count and no named-user list, and the bench may live on an internal file share reachable by that location's staff.
Scope of “one location”: one street address. A second plant is a second license, at the same price. If you are not sure whether your setup counts as one location, ask before you buy rather than after.
Set up once, to your standards. Your alloys in the materials list, with their densities and the specification strings your prints use; your thread classes and fits as the defaults; your finish specifications in place of ours; your tolerance block values. You send the values and we build them in — we do not verify them, and checking that they are right for your application is yours.
Twelve months of email support on the bench itself, from the date of purchase. That covers “it is doing something wrong” and “how do I make it do X.” It does not cover reviewing your designs, which is engineering and is quoted separately.
Your customizations are carried forward into each Release 1 update. You will not have to re-specify them.
What every license grants
Produce unlimited drawings, DXF, SVG and STEP files from the bench, and make and sell the parts you draw — no royalty, no reporting, no cap on quantity. What you make with a tool is yours; that is what tools are for.
Give a drawing to a machine shop, a laser house or a plating house so they can make your part.
Keep using the version you bought for as long as you like. There is no subscription and nothing expires. Every update within Release 1 is free, and a future Release 2 would be a separate purchase — Release 1 is not taken away from you when it arrives.
What no license grants: sharing, reselling, sub-licensing or publishing the bench itself, putting it on a network or a website where others can reach it, or removing the release and authorship markings from the file.
What it does not do
The bench is sold as it is, with no warranty. It calculates mass, balance and restitution from geometry and it draws what you ask for — but a drawing is a proposal, not an inspection, and the shop floor is where a design is found out. Check the output before you cut metal.
It does not make your drawings correct for your job. The datum scheme, the tolerance block, the thread class and the surface finishes are template decisions, made once for a family of parts and not judged for your application. The handbook that ships with the bench says which decisions have been made for you. Reviewing and approving the drawings is yours, and your engineer's signature on them means what it has always meant.
Liability is limited to what you paid.
How this one starts
By email, not by checkout. Send the values you want built in — alloys and densities, thread classes and fits, finish specifications, tolerance block — and the bench is built to them and sent to you. Allow a few working days. Anything needing new geometry, a new part or a new sheet is development work and is quoted separately. Purchase orders welcome.
Contact
contact@daydreamingisessential.com
LICENSE TEXT 2026-09-28 · 8584ff48ce